(1)Engine: Japanese Robin 6.0Hp or Honda 5.5Hp four-stroke air-cooled gasoline engine.
(2)Driving system: The original imported variable speed transmission system has automatical brake device flexible operated in forward, back off or stop(HTS).
(3)Electronic controller: set 3 standard spaces, and micro-electronic intellective control. Freely adjust the convex numbers, length, height and space according to the needs of customer individual. The convex height: 3-7mm.
(4)Driving speed: Foward 0-4km/h, back off 0-3.2km/h.
(5)Max climbing capability: 15
(6)Heating materials: Petroleum liquefied gas
(7)Paint tank: The tank made of stainless steel or cold rolling oxidation resistant steel equips with erect type hand stirring device. Cubage: 6.5cubic litre (about 120kg), whose heating temperature can be freely controlled (0-300 degree)according to the different kinds of paint choosen by owners.
(8)Glass beads bin: Pin with window can check the quantity of glass micro-beads in time. Cubage: 15kg.
(9)Glass beads dispenser: The automatical definite quantity dispenser synchronous with the paint scraping system, ensures the dispenser evener and more economical.
(10)Chassis: The firm welding frame, whose surface has been chrome-plated or high temperature treatment. Equips with high speed type imported bearing to ensure the whole machine more lightsome and convenient.
(11)Marking bucket: The structure plate is made of imported special steel with fire resistance, oxidation resistance and deformation resistance, which has better stability after punching. The plinth is made of special alloy steel and applies the pneumatic scrape structure.The floor knife adopts imported hard tungsten knife-head. The nice manufacture techniques of bucket ensure better sensibility, abrasion resistance and firmness, and the convex shape more regular, the edge of bottom line more straight, the head more perfect. The configuration standard of bucket is 150mm.
(12)Rubber wheel: The right front wheel is a special modified rubber one with fire and abrasion resistance, which can well prevent tackless or deformation after long high temperature effects. The left front wheel and the back stern wheel are made of special naturally modified rubber with abrasion resistance, whose nave is made of refined steel. The diameter of front wheel: 250mm, the diameter of back wheel: 190mm.
(13)Back stern wheel guide arm: Lock the direction device which can ensure the road-marking machine freely operated in straight or twist.
(14)Guide rod: The chrome-plated device which can be freely adjust up, down, left, right by handle.
(15)Handle bar: The individual design conforms to the requirements of the human body projects. The height can be freely adjusted according to the demands of operator.
(16)Alarm function: Flashlight with flexible flicker frequency largely improve the safety in construction.
(17)Heating system: A 15kg petroleum liquefied gas storage tank is used to respectively supply gas to heating warmer in the paint tank, front and back nozzles of road-marking machine and outside inflame gun, whose power is controlled by different valves. The valves and gas tools are imported parts.
(18)Marking width: Change different marking buckets with different specifications (100, 150, 200, 300mm)according to the needs of projects .
(19)Marking thickness: The thickness of bottom line (1.5-2.5mm )and the convex height (3-7mm)can be freely adjusted through adjusting the control device of the floor knife and the convex height.
